This page can be utilized to learn how to measure to order your Double-Ostomy Support Belt for the best fit & function:
All PouchWear Premium Custom Collection products are fully custom made using the information & preferences chosen during checkout. Please review the following information on how to find the measurements needed to custom make your supports as accurately as possible.
TAKE ME TO THE PRODUCT PAGE:
ACTIVEWEAR DOUBLE-OSTOMY BELT
Choose the shape of the pouch along with the type of closure for your pouch:
• ROUND - round bottom, best for bags with a round shape & urostomy appliances to contain drainage spout.
• FLAT - standard flat bottom with curved edges, perfect for wide bottom bags, or appliances with clips or hard-bar closures.
• ENCLOSED - ideal for close ended ostomy appliances, will have no pocket & no opening at the bottom of the pouch cover.
• FLIP-OUT - standard, thin profile & most descreet under clothing. Pocket closed & opened via a fabric overlay to keep bag away from skin & allow easy access.
• ZIPPER - pocket closed & opened via a zipper with a fabric overlay to keep zipper off of body.
• VELCRO - pocket closed & opened using velcro with a fabric overlay to keep the velcro off the body.
• OPEN BOTTOM - contains internal pocket, bottom of pouch remains open. Not recommended for horizontally worn bags.
The direction the bag will be worn on the body within the support product. Refer to the direction the drainage end of the bag is facing when looking down at the abdomen.
*Equip the ostomy appliance in the direction the bag will be worn in the supports, prior to measuring, for the most accurate information. Diagonal wear is tailored at a 45 degree angle.
*This is not the size of the stoma opening. Do not use box measurements*
To measure, lay the bag down on a flat surface with the front of the bag facing you and fold the left side of the bag towards the middle until unable to fold any further; this will expose the area where the bag and flange/wafer meet. Repeat for the right side of the bag and measure the diameter of the ring; from the fold on the left to the fold on the right. Do not include tabs into the measurement. All ring openings are flexible and will be able to stretch over any tabs while equipping.
*If your ring is oblong, or oval in shape, follow the steps to measure from left to right, then also measure from the top of the ring to the bottom of the ring and specify the additional measurement in the 'special instructions' option.
This measurement refers to the amount of space between the top of the bag and the top of the ring, or where the ring is located on the bag.
To measure, lay the bag down on a flat surface with the front of the bag facing you, and fold the top of the bag down towards the middle until unable to fold any further. Measure from the fold you created to what was the top of the bag. This measurement will average around 1", sometimes a bit more or a bit less.
The bag width refers to the measurement from the left to the right of the widest part of the bag. For bags that are kidney, or unusually shaped, measure to and from the furthest edges.
The bag length refers to the measurement from the top of the bag to the bottom of the bag.
Assure the bag is closed, like when worn on the body, prior to measuring. Fold & close any ends that are usually folded.
The position of the stomas, in relation to each other, horizontally on the body.
If the stomas are uneven, note the stoma that is higher, when looking down at the abdomen (ex: "the right stoma is 1" higher"). This measurement is taken from the center of the stomas. The amount of inches added may add to the width of the belt around the body.
The amount of space between both stomas, from the center of one stoma to the other.
|STOMA WAIST SIZE|
The stoma waist size refers to the measurement from just below your stoma site and around your body. To measure, place your measuring tape slightly below the stoma (not on top), and measure around the body noting the size once the measuring tape meets.
For more accuracy, measure while standing up and prior to any heavy meals or situations in which your abdomen would swell or change in size.
*This does not refer to your clothing waist size and may not be measured specifically on the waist, depending on the location of your stoma.
Reductions, to account for the stretch in the materials, are made during tailoring; do not alter measurements being entered. Belts will be form-fitting to ensure appropriate function.
Choose your preferred belt closure to allow for adjusting the fit of your ostomy support belt.
HOOK & EYE BELT CLOSURES - standard, most streamline & discreet under clothing, preferred for ostomates with discretion as a priority
VELCRO BELT CLOSURES - easy to use, adds slight bulk under clothing, preferred for ostomates with dexterity difficulties
Added support around the ring opening area to help prevent leaks. Ideal for ostomates who struggle with keeping the flange on the body, have uneven areas around the stoma, or have persistent leak issues.
*This upgrade works best with two-piece appliances & will not be visible while wearing the belt.
Add an internal lining to reduce bag wrinkles, increase bag discretion under clothing, & helps to evenly distribute waste. Noise muffling can also be added.
*This lining will not be visible from outside of the belt.
Choosing rush manufacturing will reduce the manufacturing time frame to tailor the item(s). Choose between 1-3 or 3-5 business days, prior to shipping.
Review the Shipping page for further information.
*PouchWear Premium Custom Collection products are custom tailored using the information & preferences provided on the invoice. Please allow 7-10 business days for tailoring, on average, prior to shipping.
TAKE ME TO THE PRODUCT PAGE:
ACTIVEWEAR DOUBLE-OSTOMY BELT